201 Champagne Gold Sandblasted Colored Stainless Steel Sheet For Elevator Interior Wall Panels

Material Grade: 201 / UNS S20100
Standard: ASTM A240/A240M
Thickness: 1.0 mm
Width: 1219 mm
Length: 2438 mm
Surface finish: Sandblasted

201 Champagne Gold Sandblasted Colored Stainless Steel Sheet combines a 201 / UNS S20100 stainless steel substrate with a sandblasted surface and champagne gold PVD coating. It is designed for elevator interior wall panels, doors, ceilings, columns and other architectural interior applications.

The stainless steel sheet features a fine sandblasted texture combined with a champagne gold PVD coating. The sandblasted surface provides a uniform matte appearance, while the champagne gold finish creates a warm metallic appearance for modern architectural interiors.
The final color and texture may vary slightly according to the base surface, sandblasting parameters and PVD coating conditions.

Surface Protection

PVC or PE protective film can be applied to the visible surface.

The protective film helps reduce:

• Scratches
• Dust contamination
• Fingerprints
• Handling marks
• Surface damage during transportation

The protective film should be removed after fabrication and installation according to project requirements.

Manufacturing Process

Cold Rolling

The 201 stainless steel substrate is cold rolled to achieve the required thickness and surface condition.

Surface Preparation

The stainless steel surface is cleaned and prepared before sandblasting.

Sandblasting

A controlled abrasive process creates the required uniform matte texture.

PVD Coating

The prepared sheet is placed in a vacuum chamber where the decorative champagne gold coating is deposited onto the stainless steel surface.

Inspection

Finished sheets are inspected for dimensions, surface appearance, color consistency and coating quality before packing.

201 Champagne Gold Sandblasted Colored Stainless Steel Sheet is mainly used for indoor architectural and elevator decoration where a warm metallic appearance and matte textured surface are required.

• Elevator interior wall panels
• Elevator door panels
• Elevator ceiling panels
• Elevator control panel surrounds
• Hotel lobby and interior walls
• Commercial building interiors
• Decorative wall cladding
• Interior columns
• Decorative partitions
• Retail and showroom interiors
• Reception areas
• Architectural feature panels

The standard 1.0 × 1219 × 2438 mm sheet can be cut or fabricated according to elevator panel dimensions and project drawings.

Champagne Gold Decorative Appearance

The champagne gold finish provides a warm metallic appearance suitable for modern elevator interiors, hotels, commercial buildings and premium architectural spaces.

Sandblasted Matte Surface

The sandblasted texture creates a uniform matte appearance and provides a different visual effect from mirror and highly polished stainless steel finishes.

PVD Coating

The PVD coating provides a durable decorative surface and helps maintain the metallic appearance during normal indoor use and maintenance.

Easy Custom Fabrication

The 1.0 mm sheet can be processed by cutting, bending, punching, drilling and other common sheet-metal fabrication methods.

Standard and Custom Sizes

The standard size is 1.0 × 1219 × 2438 mm, while custom thicknesses and dimensions can be supplied for elevator and architectural projects.

Surface Protection

PVC or PE protective film can be applied to reduce scratches and handling marks during transportation, fabrication and installation.

Suitable for Bulk Projects

The product is suitable for elevator manufacturers, interior contractors, architectural projects and other bulk commercial orders.

201 Stainless Steel Supply

We supply 201 / UNS S20100 stainless steel sheet for architectural and indoor decorative applications, with material documentation available according to order requirements.

Defined Product Specification

The standard specification for this product is clearly defined as 1.0 × 1219 × 2438 mm, with champagne gold PVD coating and sandblasted surface.

Custom Processing

We can arrange cut-to-size sheets and other processing according to elevator panel drawings and project requirements.

Surface Inspection

Sheets can be inspected for thickness, dimensions, surface condition, color consistency and decorative finish before shipment.

MTC and Documentation

Material Test Certificates and inspection documentation can be supplied for applicable orders, including EN 10204 3.1 MTC.

Sample Approval

For projects with strict appearance requirements, samples can be arranged for approval before bulk production to confirm the champagne gold color and sandblasted texture.

Export Packaging

Sheets are supplied with protective film and export packaging designed to reduce surface damage during international transportation.

Bulk Industrial Supply

JUDE STEEL focuses on bulk industrial and architectural orders, supporting elevator, hotel, commercial building and interior decoration projects rather than retail orders.

Difference from Other Colored Stainless Steel Sheets

201 Champagne Gold Sandblasted Colored Stainless Steel Sheet differs from other colored stainless steel sheets mainly in its substrate grade, surface texture, color and coating combination.

Sandblasted vs Mirror Finish

The sandblasted surface has a matte appearance with lower reflection than a mirror finish. It is suitable for elevator interiors where designers want a softer metallic effect rather than a highly reflective surface.

Sandblasted vs Hairline Finish

Hairline stainless steel has visible directional lines, while the sandblasted surface provides a more uniform fine-textured appearance. This makes sandblasted champagne gold suitable for projects requiring a less directional decorative effect.

Sandblasted vs Brushed Finish

Brushed finishes normally show a directional grain pattern. Sandblasting produces a more evenly textured matte surface, giving the champagne gold color a softer and more uniform appearance.

Advantages of 201 Champagne Gold Sandblasted Colored Stainless Steel Sheet

1. Warm Champagne Gold Appearance

The champagne gold color provides a warm metallic appearance that works well with elevator interiors, hotel decoration and modern commercial spaces.

2. Uniform Matte Texture

The sandblasted surface reduces the strong reflection associated with mirror stainless steel and provides a refined matte appearance.

3. PVD Decorative Coating

The PVD coating provides a thin decorative surface with good appearance retention under suitable indoor service conditions.

4. Suitable for Elevator Interior Panels

The combination of 201 stainless steel + sandblasted finish + champagne gold PVD is particularly suitable for elevator wall panels, doors and ceiling panels.

5. Flexible Fabrication

The sheet can be cut, bent, drilled, punched and fabricated into custom elevator panels and architectural components.

6. Standard Size Available

The standard product specification is 1.0 × 1219 × 2438 mm, with custom dimensions available for project requirements.

7. Sample-Based Color Control

For large architectural projects, customers can approve a physical sample before bulk production to confirm the champagne gold color and sandblasted texture.

8. Cost-Oriented Material Selection

201 stainless steel can provide a more cost-oriented substrate option for suitable indoor decorative applications compared with higher-nickel stainless steel grades. For humid, coastal or highly corrosive environments, grade selection should be based on the actual service conditions.

Q1: What is the standard size of the champagne gold stainless steel sheet?
A1: The standard size for this product is 1.0 × 1219 × 2438 mm. Custom thicknesses, widths and lengths are available for elevator and architectural projects.
Q2: What stainless steel grade is used?
A2: The standard substrate is 201 / UNS S20100 stainless steel.
Q3: Is the champagne gold finish produced by PVD?
A3: Yes. The champagne gold color is produced using a PVD vacuum coating process over the sandblasted stainless steel surface.
Q4: What is the surface finish?
A4: The sheet has a sandblasted finish, which provides a fine, uniform matte texture with relatively low surface reflection.
Q5: Can this sheet be used for elevator interior wall panels?
A5: Yes. It is suitable for elevator interior wall panels, elevator doors, ceiling panels, control panel surrounds and other indoor decorative applications.
Q6:How is the surface quality inspected?
A6: Inspection can include thickness, dimensions, surface appearance, color consistency, sandblasted texture and PVD coating appearance. Project-specific inspection requirements can also be arranged.