304 PVD Vacuum Coated Colored Stainless Steel Sheet 8K Mirror Finish For Construction Projects

Material Grade: 304 / UNS S30400 / EN 1.4301 / X5CrNi18-10
Standard: ASTM A240 / ASME SA240
Manufacturing Process: Cold Rolled
Thickness: 0.5-3.0 mm
Width: 1000 / 1219 / 1500 mm
Length: 2000 / 2438 / 3000 mm
Surface Finish: 8K Mirror

This 304 PVD stainless steel sheet is developed for construction and architectural projects where both surface appearance and material performance need to be considered. It combines a polished 8K mirror substrate with a PVD decorative coating to create a reflective colored metal surface.

The 304 stainless steel base provides a combination of corrosion resistance, strength and fabrication capability, while the 8K surface gives the sheet a highly reflective architectural appearance. The PVD layer is available in different metallic colors to match project design requirements.

Rather than supplying the sheet only as a standard decorative material, we can prepare the product according to project specifications, including thickness, width, length, surface finish, color, cutting requirements and protective film.

Typical uses include elevator interiors, wall panels, columns, ceilings, entrance areas, hotel interiors, commercial buildings and other architectural metalwork.

Bulk project orders can be supplied with material documentation, dimensional inspection and surface inspection according to the agreed purchase requirements.

The PVD finish is applied over the prepared stainless steel surface to create a colored metallic appearance without relying on conventional liquid paint.

For architectural stainless steel, the final appearance is influenced by several factors, including the 304 substrate, mirror polishing condition, surface cleanliness, coating parameters and viewing angle.

The PVD process is therefore treated as part of the overall surface system rather than simply a color applied to stainless steel. This approach is useful when the project requires consistent appearance across multiple sheets or different batches.

Available finishes can include gold, champagne, bronze, rose gold, black and other project-specific metallic colors. Final color selection should be confirmed using an approved sample where appearance consistency is critical.

304 PVD 8K mirror stainless steel sheet is commonly selected when an architectural project requires a reflective metallic surface combined with the fabrication characteristics of stainless steel.

Typical project applications include:

• Elevator cabin walls and decorative panels
• Elevator door panels
• Interior wall cladding
• Column and pillar coverings
• Ceiling panels
• Entrance and lobby features
• Hotel interior decoration
• Shopping mall interiors
• Commercial building interiors
• Decorative partitions and doors
• Reception and feature walls
• Architectural metalwork

For exterior applications, project conditions such as exposure, cleaning methods, installation design and coating requirements should be evaluated before material selection.

For large construction projects, selecting a PVD color only from a product photograph may not be sufficient. Lighting, viewing angle, mirror reflectivity and surrounding materials can affect the perceived color.

For project orders, the required color can be confirmed before bulk production. Where appearance matching is important, an approved physical sample can be used as the reference for subsequent production.

Procurement teams can provide the required color, reference sample, project finish schedule or other available specifications. The agreed sample and surface requirements should be confirmed before placing the bulk order.

Large architectural projects often require stainless steel sheets to be prepared according to panel dimensions rather than supplied only in standard mill sizes.

Available processing can include:

• Cut-to-size
• Cut-to-length
• Shearing
• Slitting
• Laser cutting
• Edge trimming
• Drilling
• Bending

For quotation and production, procurement teams can provide drawings, finished dimensions, tolerances, required quantity and installation details. This allows the material supply to be matched with the project's fabrication requirements.

Protective film can be retained during processing and shipment where required to reduce the risk of surface damage before installation.

Construction projects may require more than a basic product specification. Material documentation and inspection requirements can be agreed before production.

Available quality documentation and inspection items include:

• Stainless steel grade verification
• Chemical composition
• Mechanical properties
• Thickness measurement
• Width and length measurement
• Flatness inspection
• Surface appearance inspection
• 8K mirror surface inspection
• PVD color and coating appearance inspection
• Quantity verification
• Heat number traceability
• EN 10204 3.1 Material Test Certificate

Third-party inspection can also be arranged when required by the purchasing contract or project quality plan.

For architectural projects, material selection is often based on several requirements at the same time rather than appearance alone.

Reflective architectural appearance
The 8K mirror substrate provides a bright, highly reflective surface suitable for modern interior and architectural designs.

Metallic color without conventional paint
PVD creates a colored metallic surface while retaining the underlying stainless steel substrate.

304 stainless steel base
304 offers a widely used combination of corrosion resistance, strength and fabrication performance.

Consistent sheet-to-sheet appearance
Surface preparation and color approval can be controlled for projects requiring multiple sheets to be installed together.

Processing flexibility
Sheets can be supplied in standard dimensions or prepared according to project cutting requirements.

Project documentation
MTC, dimensional inspection and surface inspection can be included according to the purchase specification.

The PVD coating is applied to the surface of the stainless steel sheet, while the base material remains 304 stainless steel. The typical chemical composition is shown below according to ASTM A240 / ASME SA240 requirements.

1. Project-Specific Surface Requirements

We supply 304 PVD stainless steel sheets according to the required 8K mirror finish, PVD color, thickness, dimensions and protective film specifications.

2. Focus on Surface Consistency

For architectural projects, appearance consistency between adjacent sheets is important. We pay attention to mirror substrate preparation, PVD color and surface condition during production and inspection.

3. Custom Sheet Dimensions

In addition to standard sheet sizes, custom width and length can be arranged for project requirements. Cut-to-size and cut-to-length services help reduce additional fabrication work.

4. Fabrication Support

Available processing includes shearing, slitting, laser cutting, edge trimming, drilling and other requirements agreed with the buyer.

5. Material Traceability

The 304 stainless steel substrate can be supplied with heat number information and EN 10204 3.1 MTC for applicable orders, supporting material traceability during project procurement.

6. Surface Inspection

Inspection can cover thickness, dimensions, flatness, 8K mirror condition, PVD color consistency and visible surface defects according to the agreed purchase specification.

7. Sample-Based Color Confirmation

For projects with strict appearance requirements, a sample can be used as the reference for confirming the required PVD color and surface appearance before bulk production.

8. Protective Packaging

PVC/PE protective film, waterproof protection and reinforced export packaging can be arranged to help protect the finished surface during transportation and site handling.

9. Bulk Construction Orders

We focus on bulk industrial and construction orders and can coordinate material specifications, processing, inspection, documentation and delivery requirements for project procurement.

Q1: Can the PVD color be approved before bulk production?

A1: Yes. For projects with strict appearance requirements, a physical sample or agreed color reference can be confirmed before bulk production.

Q2: Can the sheets be supplied according to our panel dimensions?

A2: Yes. Custom width and length, cut-to-size and other processing requirements can be discussed according to project drawings and quantities.

Q3: How can we control color consistency across a large order?

A3: Color consistency can be managed by confirming the required color and surface specification before production and using an approved sample as the project reference where necessary.

Q4: Is the 8K mirror finish applied before PVD coating?

A4: Yes. The mirror-polished stainless steel surface serves as the substrate for the PVD finish. The final appearance is affected by both the substrate preparation and coating process.

Q5: Can the protective film remain on the sheet during installation?

A5: PVC or PE protective film can be supplied to help protect the surface during handling and installation. Film removal requirements should be confirmed according to the project schedule.

Q6: Can you provide an EN 10204 3.1 MTC?

A6: An EN 10204 3.1 MTC can be supplied for applicable orders, with material and heat information according to the agreed documentation requirements.

Q7: Can third-party inspection be arranged?

A7: Yes. Third-party inspection can be arranged when required by the purchasing contract or project quality requirements.

Q8: What information is needed for a construction project quotation?

A8: Please provide the required grade, thickness, width, length, PVD color, surface finish, quantity, processing requirements, delivery destination and any applicable inspection or documentation requirements.