304 Anti-Fingerprint Brushed Stainless Steel Sheet No.4 Finish EN 10088 With PVC Film
Product Details
304 brushed stainless steel sheet
,anti-fingerprint stainless steel sheet
,stainless steel sheet with PVC film
Material Grade: 304 / UNS S30400 / EN 1.4301 / X5CrNi18-10
Standard: EN 10088
Thickness: 0.5–3.0 mm
Width: 1000–1500 mm, custom width available
Length: 2000–3000 mm, custom length available
Surface Finish: No.4 Brushed + Anti-Fingerprint Treatment
| Item | Specification |
|---|---|
| Product | 304 Anti-Fingerprint Brushed Stainless Steel Sheet |
| Grade | 304 / 1.4301 / UNS S30400 |
| Standard | EN 10088 |
| Surface Finish | No.4 Brushed + Anti-Fingerprint Treatment |
| Surface Appearance | Uniform directional brushed texture |
| Thickness | 0.5–3.0 mm |
| Width | 1000–1500 mm |
| Length | 2000–3000 mm |
| Edge | Mill Edge / Slit Edge |
| Surface Protection | PVC Protective Film |
| Processing | Cut-to-Length, Slitting, Laser Cutting |
| Inspection | Dimensional, Surface, Chemical and Mechanical Inspection |
| Certification | EN 10204 3.1 MTC Available |
304 Anti-Fingerprint Brushed Stainless Steel Sheet combines the corrosion resistance and fabrication performance of 304 stainless steel with a No.4 brushed surface and anti-fingerprint treatment. The brushed finish provides a consistent linear appearance, while the anti-fingerprint surface helps reduce visible fingerprints, smudges, and routine handling marks.
The sheet is manufactured according to applicable EN 10088 requirements and can be supplied with PVC protective film to reduce scratching and surface contamination during processing, transportation, and installation.
JUDE STEEL supplies 304 anti-fingerprint brushed stainless steel sheets for architectural, elevator, interior, equipment, kitchen, and industrial applications, with custom thickness, width, length, cutting, and surface requirements available for bulk orders.
| Element | Typical / Standard Requirement |
|---|---|
| Carbon (C) | ≤ 0.07% |
| Silicon (Si) | ≤ 1.00% |
| Manganese (Mn) | ≤ 2.00% |
| Phosphorus (P) | ≤ 0.045% |
| Sulfur (S) | ≤ 0.030% |
| Chromium (Cr) | 17.5–19.5% |
| Nickel (Ni) | 8.0–10.5% |
| Nitrogen (N) | ≤ 0.10% |
| Iron (Fe) | Balance |
Typical mechanical properties for 304 stainless steel sheet include:
| Property | Typical Value |
|---|---|
| Tensile Strength | ≥ 515 MPa |
| Yield Strength | ≥ 205 MPa |
| Elongation | ≥ 40% |
| Hardness | ≤ 215 HB |
Actual mechanical properties depend on thickness, production condition, and applicable EN 10088 grade requirements.
| Property | Typical Value |
|---|---|
| Density | 7.93 g/cm³ |
| Elastic Modulus | 193 GPa |
| Thermal Conductivity | Approx. 16.2 W/m·K |
| Specific Heat | Approx. 500 J/kg·K |
| Electrical Resistivity | Approx. 0.72 μΩ·m |
| Melting Range | Approx. 1400–1450°C |
The No.4 finish is produced by mechanically grinding the stainless steel surface with abrasive materials to create a uniform directional texture.
The anti-fingerprint treatment is applied to help minimize the visibility of fingerprints and handling marks on the brushed surface.
| Surface Feature | Description |
|---|---|
| No.4 Brushed | Directional satin texture with consistent linear grain |
| Anti-Fingerprint | Helps reduce visible fingerprints and smudges |
| Appearance | Low-gloss, modern metallic appearance |
| Maintenance | Easier routine cleaning |
| Protection | PVC film helps protect the finished surface during handling |
Important: No.4 brushed finish and anti-fingerprint treatment are different processes. The No.4 process creates the surface texture, while the anti-fingerprint treatment provides additional surface functionality.
304 stainless steel is widely used because it provides a practical balance of corrosion resistance, formability, weldability, strength, and availability.
For anti-fingerprint brushed sheet applications, 304 is suitable when the buyer needs:
- Good general corrosion resistance
- A uniform decorative brushed appearance
- Good forming and fabrication performance
- Reliable welding performance
- Consistent surface quality
- Availability in multiple thicknesses and sizes
- A cost-effective alternative to higher-alloy grades for many indoor applications
For chloride-rich or more aggressive environments, a higher-alloy grade such as 316/316L may be considered.
JUDE STEEL can supply standard and customized sheet sizes according to project requirements.
| Thickness | Width | Length | Supply Option |
|---|---|---|---|
| 0.5–1.0 mm | 1000–1500 mm | 2000–3000 mm | Standard / Custom |
| 1.0–2.0 mm | 1000–1500 mm | 2000–3000 mm | Standard / Custom |
| 2.0–3.0 mm | 1000–1500 mm | 2000–3000 mm | Standard / Custom |
Custom thickness, width, length and cut-to-size dimensions are available for qualified bulk orders.
304 Anti-Fingerprint Brushed Sheet vs Standard 304 No.4 Sheet
| Feature | Anti-Fingerprint 304 Brushed Sheet | Standard 304 No.4 Sheet |
|---|---|---|
| Base Material | 304 stainless steel | 304 stainless steel |
| Surface | No.4 brushed | No.4 brushed |
| Anti-Fingerprint Treatment | Yes | Normally No |
| Fingerprint Visibility | Reduced | More visible |
| Appearance | Satin brushed + functional surface | Standard brushed appearance |
| Cleaning | Easier routine maintenance | Normal cleaning |
| Typical Use | Architectural / interior / high-touch areas | General fabrication and industrial use |
304 Anti-Fingerprint vs 316 Anti-Fingerprint Stainless Steel
| Feature | 304 | 316 |
|---|---|---|
| Corrosion Resistance | Good | Higher |
| Molybdenum | No | Approx. 2–3% |
| Chloride Resistance | Moderate | Better |
| Indoor Architectural Use | Excellent | Excellent |
| Marine / Coastal Applications | Limited depending on exposure | Generally more suitable |
| Cost | Generally lower | Generally higher |
304 anti-fingerprint brushed stainless steel sheet is commonly selected for applications where appearance, cleanability, and surface durability are important.Elevator Doors and Cabins Applications – Elevator doors, cabin walls, ceiling panels, and interior trim
Packaging specifications, sheet dimensions, quantity, and delivery requirements can be confirmed before shipment to reduce the risk of surface damage during handling and transportation.
PVC Protective Film
PVC film is applied to the finished stainless steel surface to help protect the sheet during cutting, handling, transportation, fabrication, and installation.
The film helps reduce:
- Surface scratches
- Dust contamination
- Handling marks
- Minor abrasion during transportation
The appropriate film specification can be discussed according to the customer's processing method and application requirements.
The PVC film is a temporary protective layer and should be removed according to the customer's installation or fabrication procedure.
Packaging and Delivery
304 anti-fingerprint brushed stainless steel sheets are packaged to protect the finished surface during international transportation.
Typical packaging may include:
- PVC protective film
- Waterproof paper
- Stainless steel sheet packing
- Protective corner materials
- Steel strapping
- Export seaworthy wooden pallets or cases where required
Packaging can be customized according to container loading, destination, handling method, and buyer requirements.
Why Choose JUDE STEEL?
When sourcing anti-fingerprint stainless steel sheet for industrial or architectural projects, buyers can work with JUDE STEEL for:
- 304 stainless steel supply with traceable material information.
- No.4 brushed and anti-fingerprint surface options for appearance-focused applications.
- Multiple thickness and size options for different fabrication requirements.
- Cut-to-size processing based on buyer dimensions.
- PVC protective film to reduce surface damage during transportation and fabrication.
- EN 10088 material options according to the applicable product specification.
- EN 10204 3.1 MTC available for applicable orders.
- Dimensional and surface inspection before shipment.
- Bulk industrial order support with export packaging and delivery coordination.
FAQ
Q1. What is 304 anti-fingerprint brushed stainless steel sheet?
A: It is 304 stainless steel sheet with a No.4 brushed surface combined with an anti-fingerprint treatment designed to reduce visible fingerprints and handling marks.
Q2. Is anti-fingerprint the same as No.4 brushed finish?
A: No. No.4 is the mechanical surface finish, while anti-fingerprint is an additional surface treatment.
Q3. What standard is used for this 304 stainless steel sheet?
A: The material can be supplied according to applicable EN 10088 requirements. The exact specification should be confirmed against the purchase order.
Q4. Can the sheet be supplied with PVC film?
A: Yes. PVC protective film can be supplied on the finished surface to reduce scratches and contamination during handling and transportation.
Q5. Can you provide an EN 10204 3.1 MTC?
A: Yes, an EN 10204 3.1 MTC can be provided for applicable orders, subject to the agreed material specification.
Q6. Can you cut 304 anti-fingerprint sheet to our required size?
A: Yes. Cut-to-length, slitting, laser cutting, and other custom processing can be arranged according to drawings or dimensional requirements.
Q7. Is 304 suitable for outdoor applications?
A: 304 can be used in many outdoor environments, but suitability depends on exposure conditions. Marine, coastal, high-chloride, and chemically aggressive environments may require 316/316L or another higher-alloy grade.
Q8. How do you protect the brushed surface during shipment?
A: The finished sheet can be supplied with PVC protective film, together with waterproof and export packaging to reduce handling and transportation damage.
Mr. Deng
- Email: judesteel@juqing.hk
- Tel: 86-19033681875
- WhatsApp: 8619033681875
-
WeChat:
13519167008
-
UNS S32205 Duplex Stainless Steel Plate with High Corrosion Resistance and Acid Resistant for Tanks Vessels
UNS S32205 duplex stainless steel plates offer superior acid & chloride corrosion resistance, high strength (448MPa yield), and ISO 9001 certification. Available in custom sizes (0.3-50mm) for tanks, vessels, and chemical processing. -
Thin Walled 316L Stainless Steel Pipe Stainless Steel Seamless Tube Anti Corrosion JIS Standard
Thin Walled 316L Stainless Steel Seamless Tube (JIS Standard) - Anti-Corrosion High-Performance Pipe Our Thin Walled 316L Stainless Steel Seamless Tube is a high-quality precision product strictly manufactured in accordance with JIS (Japanese Industrial Standard) requirements, integrating excellent ... -
6000 Series Aluminum Alloy Profile with High Corrosion Resistance Precision Cutting and Custom Extrusion
6000 Series aluminum extrusion profiles with ASTM certification. High corrosion resistance, lightweight strength, and full custom services including bending, cutting & welding. OEM support with stable specs for industrial applications. -
ASTM A312 Seamless 316L Stainless Steel Pipe Corrosion Resistant For Chemical And Marine Applications
316L stainless steel pipes offer superior corrosion resistance, especially against chlorides. Available in seamless types per ASTM standards, with custom sizes & fast delivery. Ideal for chemical, marine & food industries.
