JIS G3141 SPC Cold Rolled Steel Coil 0.5–3.0mm For Stamping And Metal Fabrication

JIS G3141 SPCC Cold Rolled Steel Coil 0.5–3.0mm is a commercial-quality cold rolled steel product with a smooth surface, uniform thickness, and good formability. It is suitable for stamping, bending, slitting, and general metal fabrication.

SPCC steel coil offers reliable dimensional accuracy and consistent processing performance, making it widely used in automotive components, electrical enclosures, home appliances, metal furniture, and sheet metal parts. Customized thickness, width, coil weight, and slitting services are available.

• Form: Cold-rolled coil, thickness range 0.5–3.0mm

• Chemical composition limits (typical SPCC) 

  • Carbon (C): ≤ 0.15 %

  • Manganese (Mn): ≤ 0.60 %

  • Phosphorus (P): ≤ 0.10 %

  • Sulfur (S): ≤ 0.05 %

• Elongation: ≥ 34 % (t ≥ 1.0 mm) 

• Tensile strength: Not specified in JIS G3141, but typically 270–410 MPa 

• Hardness: ~40–70 HRB 

• Surface finish: Bright (B) or dull (D), depending on mill process 

• Temper grade: Standard temper (S) is common; “T” suffix (SPCCT) indicates guaranteed tensile test values  

Why No Tensile Strength Specification?

JIS G3141 SPCC is designed for formability and surface quality, not structural load-bearing. If you need guaranteed strength, higher grades like SPCD (drawing quality) or SPCE (deep drawing quality) are specified.

Grades in JIS G3141

• SPCC – Commercial quality (SPCC, SPCCT)

• SPCD – Drawing quality (SPCD, SPCD8, SPCD4, SPCD2)

• SPCE – Deep drawing quality (SPCE, SPCEN for non-aging)

• SPCF/SPCG – Extra deep drawing

ASTM & EN Equivalents

• ASTM A1008 CS Type B (SPCC) 

• EN 10130 DC01

Applications

• Automotive body panels

• Appliance housings

• Office equipment enclosures

• Furniture

• Bicycle frames and components

• General stamped parts
  

  For Stamping and Metal Fabrication

  JIS G3141 SPCC Cold Rolled Steel Coil is well suited for general stamping and metal fabrication due to its good formability, smooth surface, and consistent thickness. It can be processed into a wide range of sheet metal components using conventional manufacturing methods.

  Stamping Applications

  SPCC cold rolled steel coil is suitable for:

  • Automotive Stamping Parts – brackets, supports, covers, mounting components
  • Electrical Enclosures – control cabinet panels, switch boxes, equipment housings
  • Home Appliance Parts – refrigerator panels, washing machine components, appliance housings
  • Metal Hardware – brackets, clips, holders, covers
  • General Sheet Metal Parts – panels, plates, formed components

  Its good cold-forming performance allows the material to be processed through blanking, punching, bending, pressing, and conventional stamping.

  Metal Fabrication Applications

  SPCC coil can also be used for general metal fabrication, including:

  • Slitting – producing narrow-width steel coils
  • Cutting – converting coils into sheets or blanks
  • Bending – manufacturing brackets, panels, and formed parts
  • Punching – creating holes and component profiles
  • Welding – fabricating assemblies and structural sheet metal components
  • Roll Forming – producing continuous profiles and sections