201 304 316 Stainless Steel Threaded Pipe Fittings High Corrosion Resistance

Product Process: Silicone Sol Lost Wax Casting

Pressure: 10KG/CM2 (150LBS), 60kg/cm2 (1000WOG)

Thread standard: BSPT, NPT, BSP, DIN, etc.

Size: 1/8"-4’

Material: 201, 304, 316, etc.

Advantages: Stainless Steel Pipe threaded pipe fittings are environmentally friendly product that replaces traditional carbon steel, aluminium and copper products, the product has a long service life, beautiful appearance, acid and alkali resistance, corrosion resistance. It is the ideal choice for high-grade communities, hotels and equipment manufacturers.

Stainless steel pipe threaded fittings are used to connect the stainless steel pipe, its connection mainly relies on the pipe fittings and pipe threads to achieve the fit.

Elbow: one of the most common threaded fittings, used to change the direction of the stainless steel pipe, usually 45 ° and 90 ° two kinds of bending angle. Through the threaded connection, it can be convenient to connect two different directions of the pipeline, so that the fluid in the piping system to achieve steering.

Tee: It can divide the fluid in one pipe into two flow directions, or bring the fluid from two pipes into one pipe. It has three interfaces and is widely used in water supply and drainage systems, chemical piping systems and other occasions, and its threaded connection facilitates branch connection in existing piping systems.

Four-way: It can realise pipeline connection in four directions, so that fluids can be distributed or pooled among four different paths. In some complex piping layouts, such as building HVAC systems or complex process piping systems in industrial plants, four-way threaded fittings play an important role.

Pipe hoop (direct head): mainly used to connect two stainless steel pipes of the same pipe diameter, to extend the length of the pipe or to replace the connection when the pipe is broken. The threads on both ends are matched with the threads of the pipe and can be firmly connected after tightening.

Reducing pipe threaded fittings (size head): used to connect stainless steel pipes with different pipe diameters, to achieve the transition of pipe diameter. There are two types: concentric and eccentric, concentric reducer has its centre line in a straight line, while eccentric reducer has its centre line not in the same straight line, which can be used according to different pipeline layout requirements.

Product Process: Silicone Sol Lost Wax Casting

Pressure: 10KG/CM2 (150LBS), 60kg/cm2 (1000WOG)

Thread standard: BSPT, NPT, BSP, DIN, etc.

Size: 1/8"-4’

Material: 201, 304, 316, etc.

Advantages: Stainless Steel Pipe threaded pipe fittings are environmentally friendly product that replaces traditional carbon steel, aluminium and copper products, the product has a long service life, beautiful appearance, acid and alkali resistance, corrosion resistance. It is the ideal choice for high-grade communities, hotels and equipment manufacturers.

Cylindrical pipe threads (e.g. G series)

Cylindrical pipe threads have a 55° tooth angle and are characterised by poor sealing, and usually require the addition of sealing materials (e.g. sisal wire, biotape, etc.) to ensure sealing of the connection. This type of thread is used in some low pressure, non-critical piping systems, such as the indoor water supply and drainage piping systems in the home in some small diameter pipe connections.

Conical Pipe Threads (e.g. R series, NPT series)

Tapered pipe threads are available in 55° (R series, British tapered pipe threads) and 60° (NPT series, American tapered pipe threads). Tapered pipe threads have a certain degree of sealing, and during the tightening process, the taper of the threads will make the fit between the threads become tighter and tighter, thus achieving a better sealing effect. It is commonly used in piping systems with high sealing requirements, such as part of the piping connections in the petroleum, chemical and other industries, but in high-pressure or special corrosive media piping connections, auxiliary sealing measures may also be required.